Free CXC Technical Drawing Paper 1 May/June 2022 past paper from 2022. Includes a worked answer key. Open the PDF, take a timed test, and study with AI on Caribbean AI.
Answer keys are free on Caribbean AI. View the answers to every past-paper question at no cost - no payment needed - with step-by-step worked solutions and instant AI marking available on Premium.
CSEC Technical Drawing Paper 1 May/June 2022 - Free CXC Past Paper with Answers
Free CXC Technical Drawing Paper 1 May/June 2022 past paper from 2022. Includes a worked answer key. Open the PDF, take a timed test, and study with AI on Caribbean AI.
Opening the interactive papers…
Every question from this paper as text. See the answers and worked solutions. Questions are the property of the Caribbean Examinations Council; Caribbean AI is not affiliated with CXC.
If a triangle with a perimeter of 198 mm is constructed with sides in the ratio of 2:3:4, then the SHORTEST side is
exactly 84 mm
exactly 64 mm
exactly 44 mm
less than 44 mm
Short arrowheads are usually placed at right angles to the ends of which of the following types of lines?
Cutting plane
Phantom
Centre
Object
Which of the following diagrams shows how to divide an angle geometrically?
Which of the following diagrams BEST illustrates the principle of constructing a tangent to a circle through the point P on the circumference?
Diagram (A)
Diagram (B)
Diagram (C)
Diagram (D)
The terms 'cabinet' and 'cavalier' refer to which of the following views?
Oblique
Isometric
Auxiliary
Perspective
Which of the following statements BEST describes the quadrilateral?
A square-shaped figure
The point where two lines meet
A four-sided figure with two parallel sides and equal angles
A plane figure bounded by four straight lines whose interior angles add up to 360°
In shape description, centre lines are used to
locate hidden object lines
determine the height of letters
locate positions and dimensions
construct base lines vertical to surfaces
AB is equal to
minor axis
major axis
major axis
minor axis
Which of the following methods of drawing an ellipse involves constructing a rectangle?
Trammel
Intersecting line
Intersecting arcs
Concentric circle
On which of the labelled plane(s) is the 'plan' shown?
I only
II only
III only
I and III only
Which of the following constructions shows the correct geometrical division of a line into two parts in the ratio 2:3?
Which of the following views would show an object as if it were cut across, exposing inside details?
Frontal
Auxiliary
Exploded
Sectional
Which of the following diagrams is a view of a right, square pyramid?
'The spiral of Archimedes' is defined as
the path generated by a point travelling in a plane such that the difference of its distance from two foci is constant and equal to the transverse axis
a plane curve generated by a point on a taut cord as it is unwound from the perimeter of a polygon
a plane curve generated by the path of a point on the perimeter of a wheel as the wheel travels on a straight track
the path generated by a point which revolves uniformly about a pole and has a uniform motion away from it
Which of the following is the ratio of the area of EFGH to that of EGIJ?
1:4
1:3
1:2
2:3
A development of an object is a drawing showing
one view
two views
a pictorial sketch
the unfolding of the surfaces
Which of the following is the eccentricity of FP:PQ in the diagram?
1:1
1:2
1:3
1:4
Which of the following statements are true about 25 in the diagram? I. It is an abbreviation for radius. II. It indicates that the surface is square. III. It avoids using a second dimension.
I and II only
I and III only
II and III only
I, II and III
Which of the following shapes is a pentagon?
Which of the following diagrams illustrates the procedure for drawing a perpendicular to a line from a point outside the line?
A man has to transform a 100 mm square drawing to the largest octagonal shape that it will contain.
Which of the following instruments should he use to perform the exercise?
30° set square
Inside caliper
Divider and set square
Outside caliper and divider
What is the minimum time workshop participants must wash their hands?
4 minutes
1 minute
40 seconds
20 seconds
A path outlining a point on the circumference of a circle as the circle rolls, without slipping, along a straight line.
What type of locus is described above?
Helix
Ellipse
Cycloid
Involute
Which of the following circles is correctly dimensioned?
A deep laceration to the arm by a sharp tool requires the victim to first
go to the hospital to get medical help
ignore the laceration and allow it to heal naturally
apply a large bandage and pressure to the laceration
apply surgical alcohol and allow the blood to cool down naturally
The lines labelled in the diagram indicate various centre lines for the object.
Which of these centre lines is drawn axially?
AB
CD
EF
GH
Which of the diagrams below represents the view seen in the direction of the arrow?
A materials safety data sheet provides guidance on the
art of drawing safety materials on data sheets
safe handling of potential hazards in the home
safe handling of potential hazards in the workplace
art of safely handling data sheets when labelling materials
Item 31 refers to the following diagram which shows a parabolic curve.
Which of the following measurements is the value of X?
17.5
30
40
55
A fire extinguisher painted totally red contains
foam
water
carbon dioxide
carbon monoxide
Item 33 refers to the following diagram which shows a right cone cut at X-X.
[Diagram of a right cone with dimensions and cut line X-X]
Which of the following sections BEST illustrates the cut X-X?
Item 34 refers to the following triangle.
[Diagram of a triangle ABC with angles and side lengths labeled]
The triangle in the diagram can be BEST constructed with the use of
a ruler and protractor
a set square and protractor
compasses and a protractor
compasses, a ruler and a pencil
Item 35 refers to the following construction.
[Diagram of a geometric construction with angle X indicated]
The angle X in the construction measures
Item 36 refers to the following drawing.
The drawing above shows the development of a truncated
cylindrical pipe
rectangular pipe
hexagonal prism
hexagonal pyramid
A student falls and hits his head hard against the edge of a technical drawing table. He is MOST likely to suffer from a
seizure
concussion
heart attack
nervous breakdown
What is the correct order of the following steps involved in drawing a tangent to a circle from any point outside the circle? I. Join the centre to the point outside the circle. II. Draw a circle and choose a point outside the circle. III. Bisect the line which joins centre to point and draw a semicircle.
I, II, III
II, I, III
II, III, I
III, II, I
Which of the following instruments is used to quickly draw such items as bolt heads, nuts, electrical and architectural symbols?
Stencil
Protractor
Radius curve
Beam compass
Which of the following drawings BEST represents dimensioning the size of a spanner?
The perpendicular distance between lines PQ and RS of a trapezium, PQRS, is 3.5 cm. Which of the following lines would be parallel?
RS and PQ
PR and QS
SP and QR
PS and QR
The representative ratio for a scale of 1 mm equals 1 m is
1: 100
1: 200
1:1000
1:2000
If a car picks up a tack on the circumference of one of its tyres, then the path traced by the tack as the car is driven is called
a cycloid
a parabola
an involute
an archimedean spiral
The development shown above represents that of
a hexagonal prism
an octagonal prism
a hexagonal pyramid
a heptagonal pyramid
A right-angled triangle can be constructed if given the
perimeter only
length of the chord
axis and the ordinate
hypotenuse and one other side
Which of the following diagrams shows the correct construction of a rhombus, given one diagonal and the length of the sides?
Triangle ABC is drawn within a semi-circle of diameter 100 mm. AB is equal to 80 mm. What is the length of BC?
60 mm
50 mm
36 mm
32 mm
A quadrilateral with ONE pair of parallel sides is a
rhombus
rectangle
trapezium
parallelogram
Which of the following statements is true about the construction of any regular polygon as shown in the diagram?
4 is the 45° mark on the bisector of OP.
4 is the midpoint of the bisector of OP.
6 is the 30° mark on the bisector of OP.
6 is the 75° mark on the bisector of OP.
In which of the following projections is the object drawn?
Oblique
Isometric
First angle
Orthographic
Which of the following types of lines is illustrated?
Centre line
Hidden detail
Cutting plane
Visible outline
Item 54 refers to the following drawing.
Which of the following is the correct view of the drawing taken in the direction of arrow X?
The diagram shows a triangle constructed from a given altitude and base angles. What is the value of Angle X?
45°
120°
135°
140°
In first angle projection, the view of X represents the
top
front
left side
right side
When preparing a drawing sheet, ALL horizontal lines are drawn with a
scale rule
T-square
45° set square
30°-60° set square
The drawing above shows the correct construction of a
triangle equal in area to a given polygon
square equal in area to a given triangle
square equal in area to a given rectangle
rectangle equal in area to a given triangle
In the diagram above, EF to EF' is in the ratio 3:4. The length of EF' is
15
30
60
90
Which of the following layouts represents the correct orthographic projection of a shaped block?